If you’re in the midst of filing a
Kentucky car accident claim, try not to make the common mistake of talking too much about the details of your case to anyone other than your
Louisville personal injury attorney. It’s best to stay relatively quiet about your case until you’ve reached a successful resolution.
4 Things Not to Say to Insurance Adjusters about Your Case
You’ll definitely want to avoid making these 4 statements when talking to insurance adjusters:
- “In my opinion…” – don’t make guesses or postulate about the accident to the adjusters. For example, if you were driving down I-264, don’t mention the speed at which you were travelling because you probably don’t really know for sure.
- “I’m sorry.” – never apologize while talking to the adjuster. Your good-natured apology could be construed as a confession and acceptance of blame for the accident.
- “I feel fine.” – don’t minimize your injuries to the adjuster or say you’re uninjured because it may take time for your symptoms to manifest.
- “Yes, I’ll accept that offer.” – avoid the temptation to accept the first offer that comes your way, which will most likely be lower than you deserve in the insurance company’s attempt to quickly appease you.
It’s best to get in touch with a Louisville personal injury attorney to
discuss your Kentucky car accident claim before speaking with an insurance company. That way you can be better prepared about what and what not to say.
Contacting a Louisville Personal Injury Attorney
You’ll want to discuss your Kentucky car accident claim with a lawyer before speaking with the adjusters to avoid making simple but damaging mistakes. In order to help you obtain a fair settlement for your Kentucky car accident claim, it’s best to retain the services of an experienced Louisville personal injury attorney from the Law Offices of Gray and White. We will give your case the personal attention it requires. Contact us today for a free case consultation – 1-502-210-8942.
Category: Auto Accidents
To reply to this message, enter your reply in the box labeled "Message", hit "Post Message."